Stainless Steel 18L 24L Steam Autoclave Sterilizer

Product Description:

The Portable pressure steam sterilizer have advantages of Thorough sterilization, effective, easy operation,safety in use,electricity saving, high quality and inexpensive. Autoclave sterilizer is mainly for clinical institutions to use medical equipment for steam sterilization.The main working principle of autoclave steam sterilizer is using steam as sterilization factor to kill load microorganism.

TECHNICAL PARAMETERS :

1 use AC power: 220V, frequency 50HZ; power: 2KW;

2 rated working pressure: 0.142MPa; rated working temperature: 126 ℃;

3 sterilizer net weight not exceeding 25 kg;

4 safety category: I class B general equipment (not to prevent liquid into the closed device);

5 running mode: short load continuous operation;

6 normal working conditions: ambient temperature range: +5 ℃ to +40℃; relative humidity range: not more than 80%;

Atmospheric pressure range: 70kPa ~ 106kPa.

Product Specifications:

Product Pictures:

STRUCTURAL CHARACTERISTICS

The sterilizer is portable type, it is consist of handle, the sterilization chamber cavity,The outer barrel, sterilizer and barrel cover is made of stainless steel material.

Container cover with safety valve, discharge valve. The safety valve pressure exceeds 0.14 MPA can automatically release the pressure, the performance is reliable, open the upper steam before sterilization steam valve can discharge cold air when sterilization finish.

The container cover with double scale pressure gauge with pressure and temperature reading indication.

Self control type with automatic protection function, when the container of water, the circuit will automatically cut off, the heater stops working, the effective protection of equipment use, at the same time the buzzer sounded, reminding users of supplementary water.

USAGE METHOD

Notes: The operator should focus on the equipment operation situation during the equipment working, can leave after sterilization finished , pressure relief and power failure.

Autoclave sterillization machine must placed in level surface in order to ensure the sterilizer can work normally.

Open the equipment cover and take out the sterilizing chamber (see electric heating pipe, heating pipe), to pour more than 3.5 liters of water, each must replenish the amount of water use, to avoid damage due to lack of water and electric heating tube.

Goods shall be properly covered and the order of the sieve into sterilization barrel, leaving a gap between each other. Conducive to steam penetration, improve sterilization effect. Safety valve, vent valve vapor hole do not plug, and finally cover the lid, diagonally tighten screws.

Confirm the power supply specifications and equipment requirements of the same type, and requires reliable grounding, before plug in power supply.

If the use of electric furnace or other heating source, should be removed after the power line is arranged in the heating source above the heating sterilizer.

After equipment work, when the steam pressure rose to (0.142 ~ 0.165) MPa or so, relief valve pressure to maintain a certain pressure.

after sterilization, please unplug the power cord. After 2 to 3 minutes to open the exhaust valve exhaust, to the pressure gauge to zero back to open the lid after the exhaust steam.

Hot Tags: stainless steel 18l 24l steam autoclave sterilizer, China stainless steel 18l 24l steam autoclave sterilizer manufacturers, factory, measuring cylinder with glass stopper, long neck round bottom flask, Chemistry Lab Pyrex Glass Stirring Rod 330mm Glass Stirrer Rod, Laboratory Burette Stopcocks, Flask with Standard Ground Mouth, Standard Ground Mouth Glass Flask