Medical Sterile Infusion Set With Luer Slip Or Luer Lock

Infusion set works the same way as an intravenous line does, A needle is housed inside a cannula, a tiny plastic tube that is usually placed under the skin in the subcutaneous fat. This needle is necessary to puncture the skin to insert the set. After insertion, the needle is removed and the cannula remains in place.

Send Inquiry

Introduction

The infusion set is a medical device used for intravenous infusion. Through the action of atmospheric pressure, the liquid in the bottle flows into the dripper along the thinner infusion hose. When the water column pressure in the dripper is greater than the intravenous pressure, the liquid in the bottle flows along. The tube flows into the vein. The Medical Sterile Infusion Set consists of eight parts, including intravenous needle or injection needle, needle protective cap, infusion hose, liquid filter, flow rate regulator, drip pot, cork piercer, and air filter. Each part has its own function.

Main Components:

1. Intravenous needle or injection needle: Used for venipuncture and connecting syringes, infusion sets, and blood transfusion sets for intravenous infusion of medical solutions and blood transfusions.

2. Needle protective cap: Protect IV or injection needles.

3. Infusion hose: Infusion diversion, if special medicines need to be infused in a light-proof manner, a disposable light-proof infusion set will be used to avoid photolysis, discoloration, oxidation, etc. of the medicine by light.

4. Liquid medicine filter: Filter the fine particles in the medicinal solution. If any particles enter the human body, they may cause an infusion reaction.

5. Flow rate regulator: The working principle is that the hand-pushed pulley squeezes the infusion line, causing the size of the liquid path (pathway) to change, thereby adjusting the flow rate. The infusion speed can be adjusted according to the patient's physical condition and medication.

6. Dripping pot: Guide the liquid to enter, store the liquid, observe the flow rate of the liquid, and observe the height and amount of the liquid level.

7. Bottle cork piercer: Puncture the infusion container and rely on gravity to allow the medicinal solution to enter the liquid channel of the infusion set.

8. Air filter: Filter the air entering the infusion system to reduce the contamination of drugs in the infusion and infusion reactions.

Product Specifications:

Model No	Type	Sterile Type	Packing
TYJ1501	Luer slip+Needle+150cm tube	EO Sterile	1pcs/pouch, 500pcs/carton
TYJ1502	Luer lock+Needle+150cm tube	EO Sterile	1pcs/pouch, 500pcs/carton
TYJ1503	Luer slip+Y connector+Needle+150cm tube	EO Sterile	1pcs/pouch, 500pcs/carton
TYJ1504	Luer lock+Yconnector+Needle+150cm tube	EO Sterile	1pcs/pouch, 500pcs/carton
TYJ1505	Luer slip+without needle+protector	EO Sterile	1pcs/pouch, 500pcs/carton
TYJ1506	Luer slip+Butterfly needle:150cm tube	EO Sterile	1pcs/pouch, 500pcs/carton

Photo exhibition:

product-1170-900

Packing and Shipping:

1. Sterile infusion set sample is for free, but you need pay for the sample freight cost, we can send samples by TNT, DHL, UPS or FEDEX; samples delivery time need 1-5days;

2. We also can ship goods by air or by sea,or send to your forwarder address; delivery time depends on ordering quantities. Usually it need 15-20 days after receiving deposit.

3. We use standard strong cartons to pack Infusion Set with Luer lock to ensure products safety during transportation.

our service:

1.Providing the customizing service, we can print your logo on single packing and cartons.

2.Sending the pre-production Sterile Infusion Set With Luer slip samples to client before the bulk production;

3.Good quality, reasonable price and best service.

Hot Tags: medical sterile infusion set with luer slip or luer lock, China medical sterile infusion set with luer slip or luer lock manufacturers, factory, , Laboratory Burette Stopcocks