Electronic pipettors, also known as electronic pipettes, are advanced liquid-handling instruments that have largely replaced manual mechanical pipettes in many modern labs due to their superior precision, ergonomics, and efficiency.
How to Use the Electric Pipette:
- Gently push the suction tube into the silicone adapter tube and carefully place it in place. Forproper insertion of suction tube, use separately hold the mouth of the cone tube and the upperend of the suction tube.
- Use the speed control button below the LCD screen, you can set the required suction and d-ischarge speed, suction and discharge speed has 6 steps,"" is for increase," "is for d-ecrease (the button is marked with" " ""). The LCD displays the selected speed.In ad-dition, gravity can also be used for drainage.(Note: during operation, the increase and deceleration of liquid feeding speed can be adjusted bypressing the operation button with your finger.)
- Select the appropriate speed, press the suction button, suction liquid slightly over the requiredvolume scale.
- Remove the suction tube from the liquid level of the container, Press the liquid feeding buttonto discharge part of the liquid, so that the bottom of the meniscus of the liquid in the suctiontube reaches the scale.
- Two different drainage modes:Self-gravity drainage: touch the drainage button and press it slightly, then the drainage functionwill be acted by its own weight, so that the liquid can be discharged naturally.Electric discharge: pressing the discharge button further will trigger the micro pump to speed upthe discharge speed.